“I’m concerned about the heating of external drives because many of these little enclosures provide no active air flow across the drive.”, opines Steve Gibson.
And in the field of hard disk maintenance, he would have to be the expert. SpinRite is the result of his knowledge in the field.
The case was getting far too hot for my comfort, so I drilled holes in it.
But I haven’t done this for my other two external drives, as they run cooler.
“Why do they?”, you ask.
Two likely reasons:
- The drives turn themselves off when not being used. This is known as an Idle Sleep. All three of my external drives do that.
- I suspect the drives have heat detection built-in, and they slow themselves down as they get hotter.
This would explain why my WD Passport drive slows down during heavy prolonged use.
2. isn’t so bad. But 1., the drive shutting itself down, can play havoc with instant-on applications. Such as satellite TV recording. The work-around is to find drives which don’t shutdown, such as the LaCie range of external drives.
That will be yes, which is what I answered in the comments.
In particular, my FreeAgent Go drives have the following SATA drives in them:
|Model||SATA Drive Name||Drive Part Number|
|FreeAgent Go||Seagate Momentus 5400.5||ST9320320AS|
|FreeAgent Go Classic||Seagate Momentus 5400.5||ST9160310AS|
Looking at the product pages for both drives, I noticed this comment:
1000 Gs of non-operating shock make the drive ideal for notebook PCs and industrial applications.
Non-operating means when they are not connected to your computer. Such as when they are being carried around in a backpack or bumbag.
No wonder they are a rugged & reliable drive.
On Friday, I blogged about opening the Seagate FreeAgent external drive.
The reason I had to open the drive up, was that I dropped it on the floor, and it had been behaving strangely since.
Not “broken”, just slow. That might indicate some drive damage.
So, there is only one thing to do in a case like this, and that is SpinRite.
SpinRite is the industry standard system for hard and floppy disk care, maintenance, and data recovery. SpinRite utilizes deep analysis technology to recover loss and unreadable data to locate and lock unsafe areas from use, to move endangered data to safety, and to repair areas of the drive which have become damaged or bad through use. SpinRite should be reused periodically to aid in the prevention of hard disk loss.
I’ve been using SpinRite to repair hard drives, since before the Internet.
Now if you take your faulty hard drive to a good PC repair shop, they’ll use SpinRite. So $89US is cheap, compared to a PC shop doing the same thing, and charging you hundreds of dollars.
When SpinRite is running, it looks like this:
– read all these instructions before trying this yourself.
In particular, you can probably get away with removing the top cover only.
– using a BLUNT object, such as a thin screwdriver, slide it along the gap between the “metal” top and white case “filler”.
(the observant amongst you lot will have noticed the bottom is already removed. With the benefit of hindsight, I probably didn’t need to do that.)
– Pry the case apart.
This is the FreeAgent Classic. My one is a 160GB external drive.
Step 1 – using a BLUNT object, such as a thin screwdriver, slide it along the front of the wedge.
Step 2 – Pry the case apart.